Resource center

Welcome to our Resource Center. From this page, you can access all our documentation.

29/03/2019

Beam Profile Monitor Incorporating Very Large Area Electron Generator Arrays

The precise determination of transverse beam profiles in accelerator and collider systems is critical to proper operation. The high energy physics community has long sought a capability to determine location and focus of charged particle beams racing through accelerator tubes. Imaging a charged particle beam traveling at speeds approaching the speed of light without changing the velocity or ...

Papers 1.11 MB pdf

29/03/2019

Characterization of Common Electron Multipliers in Harsh Environments

This paper discusses the performance of channel electron multipliers designed for use in harsh environments. Increasingly the need for portable machines that operate at high pressure or poor vacuum enviroments are also requiring smaller, more durable detectors. Lifetime and performance results are presented.

Papers 843.78 KB pdf

29/03/2019

Mass Spectrometer Detectors and Inlet Tubes

Custom Mass Spectrometer Detectors and Inlet Tubes for use in Portable Security and Forensic Applications

As analytical instruments become smaller and more portable, it is crucial to good analytical analysis to have compact, high-performing detectors that will operate in a variety of environmental conditions, most notably poor vacuum. This paper presents a wide range of available d...

Papers 4.2 MB pdf

29/03/2019

Custom MCPs for Analytical Instruments

All Photonis LongLifeTM MCPs are specially designed to provide longer lifetime with superior detection capability with pore sizes as small as 2μm. All Photonis MCPs can be ordered with an exclusive Extended Dynamic Range option that increases detection up to ten times versus traditional MCPs.

Papers 4 MB pdf

29/03/2024

Background Radiance Estimation for Gas Plume Quantification for Airborne Hyperspectral Thermal Imaging

Hyperspectral imaging in the long-wave infrared (LWIR) is a mean that is proving its worth in the characterization of gaseous effluent. Indeed the spectral and spatial resolution of acquisition instruments is steadily decreasing, making the gases characterization increasingly easy in the LWIR domain. The majority of literature algorithms exploit the plume contribution to the radiance corresp...

Papers 6.92 MB pdf

29/03/2024

Detection of Gaseous Plumes in Airborne Hyperspectral Imagery

The thermal hyperspectral sensor Hyper-Cam was mounted on a light aircraft and measured continuous releases of several atmospheric tracers from a height of 2 km. A unique detection algorithm that eliminates the need for clear background estimation was operated over the acquired data with excellent detection results. The data-cubes were acquired in a “target mode”, which is a unique method of...

Papers 1.92 MB pdf

29/03/2024

Active Thermography for Panel Paintings Inspection: A Comparative Study of Midwave and Long-Wave Infrared Spectral Analysis

Active thermography was used as a multispectral non-destructive approach for characterisation of multi-layered panel paintings and analysis of their defects caused by aging and environmental effects. Two oil compositions painted on canvas, provided by C2RMF in the Louvre museum (Centre de Recherche et de Restauration des Musées de France) were under inspection. Active Thermography was demons...

Papers 4.18 MB pdf

29/03/2024

Ground-Based Remote Sensing of CH4 and N2O Fluxes from a Wastewater Treatment Plant and Nearby Biogas Production with Discoveries of Unexpected Sources

M. Gålfalk, S.N. Påledal, R. Sehlén, D. Bastviken.

This study is an attempt to assess CH4 and N2O emissions from all the treatment steps of a wastewater treatment plant (WWTP) in Sweden, serving 145 000 persons, and an adjacent biogas production facility. We have used novel mid-IR ground-based remote sensing with a hyperspectral camera to visualize and quantify the emissions on 21 days...

Papers 6.32 MB pdf

29/03/2024

Thermomechanical Behavior of Steels in Tension Studied with Synchronized Full-Field Deformation and Temperature Measurements

G.C. Soares, N.I. Vázquez-Fernández, M. Hokka

Despite tensile testing being commonly used for investigating the mechanical behavior of materials, the occurrence of heterogeneous strain and increasing temperature at high strain rates make the experiment much more complex. This work presents a method integrating synchronous full-field stereo Digital Image Correlation (DIC) and Infrared T...

Papers 9.5 MB pdf